Products
Products
Product Introduction
This gear oil additive is made of high-pressure sulfurized isobutylene and phosphorus additive. It is suitable for high-performance gear oil that meets the requirements of API GL-5 level; it is suitable for adjusting various transmission oils and rear axle gear oils. T7208 has excellent extreme pressure performance, thermal stability and oxidation stability, which can extend the driving mileage. This product is soluble in a variety of II and III base oils.
The Recommend Dosage
| API Performance Level | Dosage wt% |
| GL-5 | 3.8 |
| GL-4 | 1.9 |
| L-CKD | 1.5/1.8 |
| L-CKC | 1.0 |
Product Introduction
| Item | Typical Value | Test Method |
| Appearance | Yellow transparent liquid | Visual |
| Kinematic Viscosity (100℃),mm2/s | Report | GB/T265 |
| Flash point (COC) ℃ | 90min | GB/T3536 |
| Phosphorus, m% | 1.23-1.65 | ASTM D5185 |
| Sulfur, m% | 28.05-37.95 | ASTM D5185 |
Packaging Storage and Transportation
Packed in iron drums with a net weight of 200kg/drum(or 1000kg/IBC), applicable to various modes of transportation.
The maximum storage and transportation temperature shall not exceed 60℃ in short term, and shall not exceed 45℃ in long term. The shelf life is 2 years, stored in dry, clean, ventilated warehouse.
In case of accidental contact with skin, wash it off thoroughly with water and detergents.
200kg/drum. 4drums/pallet, 20pallets/20’ft, total 16MTS
1000kg/IBC, 20IBCS/20’ft, total 20MTS
