Products
Products
Product Introduction
This product is made from high active polyisobutylene by thermal adduction process. As it has good thermal stability, detergency and sludge dispersancy at low temperature, it can inhibit carbon deposition and paint film formation on engine piston. Its detergency at high temperature and high-temperature resistance are much better than low Molecular Weight dispersant.
Special Features
Chlorine free; Good low temperature dispersancy;
Good oil solubility; Good solubilization
Applications
Used for blending gasoline/diesel engine oils
The Recommend Dosage
1.0% to 10.0%.
Product Technical Specification
| Item | Typical Value | Test Method |
| Appearance | Viscous Transparent Liquid | Visual |
| Nitrogen, m% | 1.0-1.3 | SH/T0224 |
| Kinematic Viscosity(100 ℃) mm2/s | 300-400 | GB/T265 |
| Total Base Number, mg KOH/g | 15-35 | SH/T0251 |
| Flash Point (COC)℃ | >180 | GB/T3536 |
| Water, m% | ≤0.1 | GB/T260 |
Packaging Storage and Transportation
Packed in iron drums with a net weight of 170kg/drum, applicable to various modes of transportation. The maximum storage and transportation temperature shall not exceed 60℃ in short term, and shall not exceed 45℃ in long term. The shelf life is 2 years, stored in dry, clean, ventilated warehouse. In case of accidental contact with skin, wash it off thoroughly with water and detergents.
