Products
Products
Product Introduction
1# Non-silicon based antifoam is used for blending all kinds of lubricants, especially for hydraulic oil which contains antirust additive T705 barium dinonynaphthalene sulfonate, and the oils require the air emission property as antifoam. This product has good compatibility with various kinds of additives, and a small effect on the air-release value, there is no special request for the adding method. It has excellent oil solubility, and it is convenient to use, and there is no need for diluting. It can be blended in oil directly under the temperature of 60°C-70°C.
The Recommend Dosage
10ppm-200ppm
Product Technical Specification
| Item | Typical Value | Teat Method |
| Appearance | Colorless transparent liquid | Visual |
| Flash point (COC), ℃ | ≥30 | GB/T267 |
| Mechanical impurity, % | ≤0.02 | GB/T511 |
| Deflation (500SN) | ≤12 | SH/T0308 |
| Anti-foam performance (24°C, 500SN), ml/ml | 100/0 | GB/T12579 |
Packaging Storage and Transportation
Packed in iron drums with a net weight of 150kg/drum, applicable to various modes of transportation.
The maximum storage and transportation temperature shall not exceed 60℃ in short term, and shall not exceed 45℃ in long term. The shelf life is 2 years, stored in dry, clean, ventilated warehouse.
In case of accidental contact with skin, wash it off thoroughly with water and detergents.
