Products
Products
Product Code : T816 Fumarate Ester PPD
Chemical Name:
Styrene Fumarate Ester Copolymer
Product Introduction
T816 Styrene Fumarate Ester Copolymer Pour Point Depressant is an orange yellow transparent thick liquid. It shows good pour point depression ability, increasing viscosity ability and improving the viscosity index. It can substitute for traditional pour point depressant.
Special Features
The products are used primarily for various industrial oils and engine oils.
The Recommend Dosage
0.3% to 1.0%
Product Technical Specification
Item | Typical Value | Typical Value | Test Method |
T816A | T816C | ||
Appearance | Light yellow viscous liquid | Light yellow viscous liquid | Visual |
Viscosity (100°C), mm2/s | ≥50 | ≥50 | GB/T 265 |
Flash point (COC) ℃ | ≥120 | ≥120 | GB/T3536 |
Mechanical Impurity, m% | ≤0.03 | ≤0.03 | GB/T511 |
Ash, m% | ≤0.06 | ≤0.06 | GB/T508 |
Water, m% | Trace | Trace | GB/T260 |
Active principle, m% | ≥60 | ≥60 | |
Reducing condensation degree,℃ | 201) | 152) | GB/T510 |
Note: Adding 0.5% T816A/C in Dalian 150SN(pour point no more than -15℃) for testing
T816A is used for paraffinic base oil, T816C is used for naphthenic base oil
Packaging Storage and Transportation
Packed in iron drums with a net weight of 180kg/drum, applicable to various modes of transportation.
The maximum storage and transportation temperature shall not exceed 60℃ in short term, and shall not exceed 45℃ in long term. The shelf life is 2 years, stored in dry, clean, ventilated warehouse.
In case of accidental contact with skin, wash it off thoroughly with water and detergents.