Products
Products
Product Introduction
PAO40 is a fully synthesized hydrogenated hydrocarbon base fluid produced from linear alphaolefin feed stocks. It can be used as a base oil or VI-improver for a wide range of automobile and industrial lubricant products, both mineral oil and synthetic based.
Special Features
-High viscosity index and excellent lubricity -High flash point and low volatility
-Compatible with mineral oils and esters -Excellent oxidant resistance
-Excellent shear stability and hydrolysis -Extend drain and improved fuel economy
Application
-Gear Oils (Automotive & Industrial) -Compressor Oils
-Hydraulic Fluids -Engine Oils and Transmission Fluids
-Greases -Other Lubes Oils
Product Technical Specification
| Item | Typical Value | Test Method |
| Appearance | Bright & Clear | Visual |
| Density (15℃, g/cm3) | 0.845 | ASTM D1298 |
| Kinematic Viscosity,mm2/s @100℃ @40℃ | 40.0 386 | ASTM D445 |
| Viscosity Index | 154 | ASTM D2270 |
| Flash Point (COC) ℃ | 285 | ASTM D92 |
| Pour Point， ℃ | -40 | ASTM D97 |
| ASTM Color | <0.5 | ASTM D1500 |
| Acid Number, mgKOH/g | 0.01 | ASTM D974 |
| Water Content, ppm | 30 | ASTM D6304 |
| Noack Volatility Loss, wt% | 0.7 | ASTM D5800 |
Packaging Storage and Transportation
Packed in iron barrel or IBC, applicable to various modes of transportation.
The maximum storage and transportation temperature shall not exceed 60℃ in short term, and shall not exceed 45℃ in long term. The shelf life is 2 years, stored in dry, clean, ventilated warehouse.
In case of accidental contact with skin, wash it off thoroughly with water and detergents.
