Products
Products
Product Introduction
T120 Heat Transfer Oil Additive Package effectively alleviates the coking tendency of heat conducting oil used for a long time. It can be formulated L-QB280、L-QB300 、L-QC320、L-QC350 heat transfer oil.
L-QB can be used in open or closed heat transfer systems with forced or non-forced circulation. L-QC can be used in open or closed heat transfer systems with forced circulation. L-QD can be used in closed heat transfer systems with forced circulation when the maximum operating temperature is higher than 320℃ and less than 350 ℃.
Heat transfer oil must be used in closed heat transfer systems when the flash point (COC) is lower than specified index, the heat transfer oil must be used in a closed heat transfer system when the initial boiling point is below the maximum service temperature.
The Recommend Dosage
| Heat Transfer Oil | Dosage (m %) |
| L-QB280 | 0.1-0.2 |
| L-QB300 | 0.2-0.3 |
| L-QC320 | 0.3-0.5 |
| L-QD-350 | 0.8-1.0 |
Product Technical Specification
| Item | Typical Value | Test Method |
| Flash Point (Open),°C | ≥110 | GB/T3536 |
| Nitrogen, m% | 1.5 | SH/T0224 |
| Kinematic Viscosity (100°C), mm2/s | Report | GB/T265 |
Packaging Storage and Transportation
Packed in iron drums with a net weight of 180kg/drum, applicable to various modes of transportation.
The maximum storage and transportation temperature shall not exceed 60℃ in short term, and shall not exceed 45℃ in long term. The shelf life is 2 years, stored in dry, clean, ventilated warehouse.
In case of accidental contact with skin, wash it off thoroughly with water and detergents.
